Verified Commit bf2719f0 authored by Zinadin Zidan's avatar Zinadin Zidan 🔒
Browse files

sm6150-common: Import nfc configs and firmware


Signed-off-by: Zinadin Zidan's avatarZinadin Zidan <zidan.roking@gmail.com>
parent cde609c8
###################### Start of libnfc-common.conf #######################
###############################################################################
# Application options
APPL_TRACE_LEVEL=0xFF
PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
NFC_DEBUG_ENABLED=0x01
###############################################################################
# File used for NFA storage
NFA_STORAGE="/data/nfc"
###############################################################################
# Force UICC to only listen to the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
UICC_LISTEN_TECH_MASK=0x07
###############################################################################
# Configure the default Destination Gate used by HCI (the default is 4, which
# is the ETSI loopback gate.
NFA_HCI_DEFAULT_DEST_GATE=0xF0
###############################################################################
# Forcing HOST to listen for a selected protocol
# 0x00 : Disable Host Listen
# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A
# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B
# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F
# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
HOST_LISTEN_TECH_MASK=0x07
###############################################################################
# Enabling/Disabling Forward functionality
# Disable 0x00
# Enable 0x01
NXP_FWD_FUNCTIONALITY_ENABLE=0x01
###############################################################################
# AID for Empty Select command
# If specified, this AID will be substituted when an Empty SELECT command is
# detected. The first byte is the length of the AID. Maximum length is 16.
AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
###############################################################################
# When screen is turned off, specify the desired power state of the controller.
# 0: power-off-sleep state; DEFAULT
# 1: full-power state
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
SCREEN_OFF_POWER_STATE=1
###############################################################################
# Default poll duration (in ms)
# The defualt is 500ms if not set (see nfc_target.h)
#NFA_DM_DISC_DURATION_POLL=333
###############################################################################
# Force tag polling for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
POLLING_TECH_MASK=0xEF
###############################################################################
# Force P2P to only listen for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
P2P_LISTEN_TECH_MASK=0xC5
PRESERVE_STORAGE=0x01
###############################################################################
# Deactivate notification wait time out in seconds used in ETSI Reader mode
# 0 - Infinite wait
NFA_DM_DISC_NTF_TIMEOUT=0
###############################################################################
# AID_MATCHING constants
# AID_MATCHING_EXACT_ONLY 0x00
# AID_MATCHING_EXACT_OR_PREFIX 0x01
# AID_MATCHING_PREFIX_ONLY 0x02
AID_MATCHING_MODE=0x01
###############################################################################
#============================================================================
# File Name: libnfc-nxp.conf
#
# Description:
# NFC configuration management file
#
# Modification History:
# Revision 1.0 2017/01/04 20:50:20 xiaohua.wang@xiaomi.com
# Initial draft version for Xiaomi C1 P2 board
#
# Revision 1.1 2017/03/01 16:32:09 xiaohua.wang@xiaomi.com
# Upgrade NFCC firmware version to 11.1.E
#
# Revision 1.2 2017/06/30 23:45:41 xiaohua.wang@xiaomi.com
# Improved notification management of received NCI Mode Set
#
# Revision 1.3 firmware version to 11.1.13/14
# Kevin.hu@nxp.com 2017/09/05 16:06:41
#=============================================================================
# FW_VERSION=ALMSL 11.1.13/14
# DEVICE_MANUFACTURER=Xiaomi
# DEVICE_MODEL=E1
# This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn5x)
# and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn5x)
###############################################################################
# Application options
# Logging Levels
# NXPLOG_DEFAULT_LOGLEVEL 0x01
# ANDROID_LOG_DEBUG 0x03
# ANDROID_LOG_WARN 0x02
# ANDROID_LOG_ERROR 0x01
# ANDROID_LOG_SILENT 0x00
#
NXPLOG_EXTNS_LOGLEVEL=0x03
NXPLOG_NCIHAL_LOGLEVEL=0x03
NXPLOG_NCIX_LOGLEVEL=0x03
NXPLOG_NCIR_LOGLEVEL=0x03
NXPLOG_FWDNLD_LOGLEVEL=0x03
NXPLOG_TML_LOGLEVEL=0x03
###############################################################################
# Nfc Device Node name
NXP_NFC_DEV_NODE="/dev/nq-nci"
###############################################################################
# Extension for Mifare reader enable
MIFARE_READER_ENABLE=0x01
###############################################################################
# Vzw Feature enable
VZW_FEATURE_ENABLE=0x01
###############################################################################
# File name for Firmware
NXP_FW_NAME="libpn553_fw.so"
###############################################################################
# System clock source selection configuration
#define CLK_SRC_XTAL 1
#define CLK_SRC_PLL 2
NXP_SYS_CLK_SRC_SEL=0x02
###############################################################################
# System clock frequency selection configuration
#define CLK_FREQ_13MHZ 1
#define CLK_FREQ_19_2MHZ 2
#define CLK_FREQ_24MHZ 3
#define CLK_FREQ_26MHZ 4
#define CLK_FREQ_32MHZ 5
#define CLK_FREQ_38_4MHZ 6
#define CLK_FREQ_52MHZ 7
NXP_SYS_CLK_FREQ_SEL=0x02
###############################################################################
# The timeout value to be used for clock request acknowledgment
# min value = 0x01 to max = 0x06
NXP_SYS_CLOCK_TO_CFG=0x06
###############################################################################
# NXP proprietary settings
NXP_ACT_PROP_EXTN={2F, 02, 00}
###############################################################################
###############################################################################
# Standby enable settings
NXP_CORE_STANDBY={2F, 00, 01, 01}
###############################################################################
# NXP TVDD configurations settings
# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
# out of them only one can be configured at a time.
NXP_EXT_TVDD_CFG=0x01
###############################################################################
#config1:SLALM, 3.6V for both RM and CM
NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, 01, 31, 00, 00, 00, 10, 00, 10, 0C}
###############################################################################
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
# monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, BA, 1E, 15, 00, D0, 0C}
#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC,
# DCDCWaitTime=4.2ms
NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 40, 0A}
NXP_RF_CONF_BLK_1={
20, 02, E7, 1B,
A0, 0D, 06, 06, 37, 08, 76, 00, 00,
A0, 0D, 03, 24, 03, 7E,
A0, 0D, 06, 02, 35, 00, 3E, 00, 00,
A0, 0D, 06, 04, 35, 2D, 02, 70, 02,
A0, 0D, 06, C2, 35, 00, 3E, 00, 03,
A0, 0D, 06, 04, 42, F8, 40, FF, FF,
A0, 0D, 04, 32, 42, F8, 40,
A0, 0D, 04, 46, 42, 68, 40,
A0, 0D, 04, 56, 42, 78, 40,
A0, 0D, 04, 5C, 42, 80, 40,
A0, 0D, 04, CA, 42, 68, 40,
A0, 0D, 06, 06, 42, 00, 02, F8, F8,
A0, 0D, 06, 32, 4A, 53, 07, 00, 1B,
A0, 0D, 06, 46, 4A, 33, 07, 00, 07,
A0, 0D, 06, 56, 4A, 43, 07, 00, 07,
A0, 0D, 06, 5C, 4A, 11, 07, 01, 07,
A0, 0D, 06, 34, 44, 66, 0A, 00, 00,
A0, 0D, 06, 48, 44, 65, 0A, 00, 00,
A0, 0D, 06, 58, 44, 55, 08, 00, 00,
A0, 0D, 06, 5E, 44, 55, 08, 00, 00,
A0, 0D, 06, CA, 44, 65, 0A, 00, 00,
A0, 0D, 06, 06, 44, 04, 04, C4, 00,
A0, 0D, 06, 34, 2D, DC, 20, 04, 00,
A0, 0D, 06, 48, 2D, 15, 34, 1F, 01,
A0, 0D, 06, 58, 2D, 0D, 48, 0C, 01,
A0, 0D, 06, 5E, 2D, 0D, 5A, 0C, 01,
A0, 0D, 06, CA, 2D, 15, 34, 1F, 01
}
# Enable DLMA
NXP_RF_CONF_BLK_2={
20, 02, D6, 01, A0, 34, D2, 23, 04, 18, 47, 40, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00, 00, 00, 00, 00, 47, 00, 00, 40, 00, 49, 00, 40, 00, 6F, 00, 40, 00, B3, 00, 40, 00, 13, 01, 40, 00, A5, 01, 40, 00, 5E, 02, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00
}
# Disable DPC
NXP_RF_CONF_BLK_3={
20, 02, 5B, 01, A0, 0B, 57, 11, 11, 90, 78, 0F, 4E, 00, 3D, 95, 00, 00, 3D, 9F, 00, 00, 50, 9F, 00, 00, 59, 9F, 00, 00, 5A, 9F, 00, 00, 64, 9F, 00, 00, 65, 9F, 00, 00, 6E, 9F, 00, 00, 72, 9F, 00, 00, 79, 9F, 00, 00, 7B, 9F, 00, 00, 84, 9F, 00, 00, 86, 9F, 00, 00, 8F, 9F, 00, 00, 91, 9F, 00, 00, 9A, 9F, 00, 00, A1, 9F, 00, 00, A7, 9F, 00, 00, B0, 1F, 00, 00, B9, 1F, 00, 00
}
# CE detector/phase
NXP_RF_CONF_BLK_4={
20, 02, 21, 04,
A0, 38, 04, 14, 0B, 0B, 00,
A0, 3A, 08, 1E, 00, 1E, 00, 1E, 00, 1E, 00,
A0, 0D, 06, 06, 16, 0E, 00, 1F, 00,
A0, B1, 02, BB, 08
}
###############################################################################
# Set configuration optimization decision setting
# Enable = 0x01
# Disable = 0x00
NXP_SET_CONFIG_ALWAYS=0x01
###############################################################################
# Set configuration optimization decision setting
# Enable = 0x01
# Disable = 0x00
NXP_RF_UPDATE_REQ=0x01
###############################################################################
# Core configuration extensions
# A009 - Time-out before standby
# A0EC - Disable/Enable SWP1 interface
# A0ED - Disable/Enable SWP2 interface
# A05E - Send RID automatically in Jewel Reader mode
# A012 - NFCEE interface 2 configuration
# A040 - Low Power Card Detector Enable
# A041 - Low Power Card Detector Threshold
# A042 - Low Power Card Detector Sampling
# A043 - Low Power Card Detector Hybrid
# A0D5 - SWP/DWP desired baudrate
# A0D8 - Configure the number of Sliding Windows used on DWP
# A0DD - Retry on SWP2 interface
# A0F2 - SVDD_PWR_REQ enable
# A09F - Add ON/OFF guard time for SVDD power management(Step value ~1mSec)
# A096 - Notify all AIDs
# A037 - SE DWP system configuration
NXP_CORE_CONF_EXTN={20, 02, 6B, 14,
A0, 09, 02, 90, 01,
A0, EC, 01, 01,
A0, ED, 01, 03,
A0, 5E, 01, 01,
A0, 12, 01, 02,
A0, 40, 01, 01,
A0, 41, 01, 05,
A0, 43, 01, 04,
A0, 46, 02, BA, 27,
A0, 47, 02, BA, 27,
A0, 81, 01, 01,
A0, D5, 01, 0A,
A0, D8, 01, 02,
A0, DD, 01, 2D,
A0, F2, 01, 01,
A0, 9F, 02, 08, 08,
A0, 96, 01, 01,
A0, 37, 01, 35,
A0, 3F, 01, 01,
A0, 29, 17, 19, 07, 40, 1C, 00, 02, 40, 1C, 00, 02, 00, 41, F4, F6, 00, 41, F4, F6, 38, 70, 00, 00, 00
}
###############################################################################
# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
# NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01}
# NXP_CORE_RF_FIELD={ 2F, 32, 01, 01}
###############################################################################
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
# to 0x00
NXP_I2C_FRAGMENTATION_ENABLED=0x00
###############################################################################
# Core configuration settings
NXP_CORE_CONF={ 20, 02, 2E, 0E,
28, 01, 00,
21, 01, 00,
30, 01, 08,
31, 01, 03,
32, 01, 60,
38, 01, 01,
33, 04, 01, 02, 03, 04,
54, 01, 06,
50, 01, 02,
5B, 01, 00,
80, 01, 01,
81, 01, 01,
82, 01, 0E,
18, 01, 01
}
###############################################################################
# Mifare Classic Key settings
# NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
###############################################################################
#Enable SWP full power mode when phone is power off
NXP_SWP_FULL_PWR_ON=0x00
###############################################################################
#### Select the CHIP ####
#PN547C2 0x01
#PN65T 0x02
#PN548AD 0x03
#PN66T 0x04
#PN551 0x05
#PN67T 0x06
#PN553 0x07
#PN80T 0x08
NXP_NFC_CHIP=0x07
###############################################################################
# CE when Screen state is locked
# This setting is for DEFAULT_AID_ROUTE,
# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
# Disable 0x00
# Enable 0x01
NXP_CE_ROUTE_STRICT_DISABLE=0x01
###############################################################################
#Timeout in secs to get NFCEE Discover notification
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
###############################################################################
NXP_DEFAULT_NFCEE_TIMEOUT=0x06
###############################################################################
# Timeout in secs
NXP_SWP_RD_START_TIMEOUT=0x0A
###############################################################################
# Timeout in secs
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
###############################################################################
# Set the default AID route Location :
# This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
# UICC2 0x04
DEFAULT_AID_ROUTE=0x02
###############################################################################
# Set the Mifare Desfire route Location :
# Configure the default NfcA/IsoDep techology and protocol route. Can be
# either a secure element (e.g. 0xF4) or the host (0x00)
# host 0x00
# eSE 0x01
# UICC 0x02
# UICC2 0x04
DEFAULT_ISODEP_ROUTE=0x02
###############################################################################
# Configure the single default SE to use. The default is to use the first
# SE that is detected by the stack. This value might be used when the phone
# supports multiple SE (e.g. 0xC0 and 0x80) but you want to force it to use
# one of them (e.g. 0xC0).
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_OFFHOST_ROUTE=0x02
###############################################################################
# Configure the single default SE to use. The default is to use the first
# SE that is detected by the stack. This value might be used when the phone
# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
# one of them (e.g. 0xF4).
# host 0x00
# eSE 0x01
# UICC 0x02
# UICC2 0x04
DEFAULT_TECH_ABF_ROUTE=0x02
###############################################################################
#Set the default Felica T3T System Code OffHost route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
DEFAULT_SYS_CODE_ROUTE=0x02
###############################################################################
#Set the default AID Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_AID_PWR_STATE=0x1B
###############################################################################
#Set the Mifare Desfire Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_ISODEP_PWR_STATE=0x1B
###############################################################################
#Set the Mifare CLT Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_OFFHOST_PWR_STATE=0x1B
###############################################################################
#Set Tech A,B,F Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_TECH_ABF_PWR_STATE=0x1B
###############################################################################
#Set the SYS_CODE Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_SYS_CODE_PWR_STATE=0x00
###############################################################################
# Configure the NFC Extras to open and use a static pipe. If the value is
# not set or set to 0, then the default is use a dynamic pipe based on a
# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
# for each UICC (where F3="UICC0" and F4="UICC1")
OFF_HOST_ESE_PIPE_ID=0x19
OFF_HOST_SIM_PIPE_ID=0x0A
###############################################################################
# Bail out mode
# If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
NFA_POLL_BAIL_OUT_MODE=0x00
###############################################################################
# AID Matching platform options
# AID_MATCHING_L 0x01
# AID_MATCHING_K 0x02
AID_MATCHING_PLATFORM=0x01
###############################################################################
#CHINA_TIANJIN_RF_SETTING
#Enable 0x01
#Disable 0x00
NXP_CHINA_TIANJIN_RF_ENABLED=0x01
###############################################################################
#SWP_SWITCH_TIMEOUT_SETTING
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
# Timeout in milliseconds, for example
# No Timeout 0x00
# 10 millisecond timeout 0x0A
NXP_SWP_SWITCH_TIMEOUT=0x0A
###############################################################################
# Loader service version
# NFC service checks for LS version 2.0 or 2.1
# LS2.0 0x20
# LS2.1 0x21
# LS2.2 0x22
# AT NFC service intialization
NXP_LOADER_SERVICE_VERSION=0x22
###############################################################################
#Timeout value in milliseconds for NFCC standby mode.The range is between 5000
#msec to 20000 msec and zero is to disable.
NXP_NFCC_STANDBY_TIMEOUT=20000
###############################################################################
#Dynamic RSSI feature enable
# Disable 0x00
# Enable 0x01
NXP_AGC_DEBUG_ENABLE=0x00
###############################################################################
#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode
# For Technology routing to ESE Technology Mask = 4
# For ISO-DEP Protocol routing to ESE Mask = 2
# It can also take TECH|PROTO = 6
# To ignore the delay set mask to = 0
NXP_ESE_WIRED_PRT_MASK=0x00
###############################################################################
#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode
#For Technology routing to UICC Technology Mask = 4
#For ISO-DEP Protocol routing to UICC set Mask = 2
#For Select AID Routing to UICC set Mask = 1
#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay
#set mask = 0
NXP_UICC_WIRED_PRT_MASK=0x00
###############################################################################
#RF field true delay Wired Mode
# delay wired mode = 1
# allow wired mode = 0
NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00
###############################################################################
# UICC mode supported
# Disable 0x00
# Enable 0x01
NXP_DUAL_UICC_ENABLE=0x00
###############################################################################
#Config to allow adding aids
#NFC on/off is required after this config
#1 = enabling adding aid to NFCC routing table.
#0 = disabling adding aid to NFCC routing table.
NXP_ENABLE_ADD_AID=0x01
###############################################################################
# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal
# JCOP CP TIMEOUT
NXP_CP_TIMEOUT={00, 77}
###############################################################################
# Enable/Disable checking default proto SE Id
# Disable 0x00
# Enable 0x01
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
###############################################################################
#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
#Enable/Disable block number checks for china transit use case
#Enable 0x01
#Disable 0x00
NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
###############################################################################
#Enable NXP NCI runtime parser library
#Enable 0x01
#Disable 0x00
NXP_NCI_PARSER_LIBRARY=0x00
###############################################################################
#This config will enable different level of Rf transaction debugs based on the
#following values provided. Decoded information will be printed in adb logcat
#Debug Mode Levels
#Disable Debug 0x00
#L1 Debug 0x01
#L2 Debug 0x02
#L1 & L2 Debug 0x03
#L1 & L2 & RSSI 0x04
#L1 & L2 & Felica 0x05
#NXP_CORE_PROP_SYSTEM_DEBUG=0x00
###############################################################################
# Enable/Disable Block Route feature.
# Block Route will restrict routing to first matched rule
# Block Route enable 0x01