Commit c99d428a authored by kakatkarakshay's avatar kakatkarakshay
Browse files

avicii: Sync with tree

parent 1ce7d068
......@@ -9,10 +9,8 @@ PRODUCT_COPY_FILES += \
vendor/oneplus/avicii/proprietary/odm/etc/odm_feature_list:$(TARGET_COPY_OUT_ODM)/etc/odm_feature_list \
vendor/oneplus/avicii/proprietary/vendor/bin/cnss-daemon:$(TARGET_COPY_OUT_VENDOR)/bin/cnss-daemon \
vendor/oneplus/avicii/proprietary/vendor/bin/dashd:$(TARGET_COPY_OUT_VENDOR)/bin/dashd \
vendor/oneplus/avicii/proprietary/vendor/bin/hw/android.hardware.keymaster@4.0-service-qti:$(TARGET_COPY_OUT_VENDOR)/bin/hw/android.hardware.keymaster@4.0-service-qti \
vendor/oneplus/avicii/proprietary/vendor/bin/hw/vendor.oneplus.hardware.CameraMDMHIDL@1.0-service:$(TARGET_COPY_OUT_VENDOR)/bin/hw/vendor.oneplus.hardware.CameraMDMHIDL@1.0-service \
vendor/oneplus/avicii/proprietary/vendor/bin/hw/vendor.oneplus.hardware.camera@1.0-service:$(TARGET_COPY_OUT_VENDOR)/bin/hw/vendor.oneplus.hardware.camera@1.0-service \
vendor/oneplus/avicii/proprietary/vendor/bin/rmt_storage:$(TARGET_COPY_OUT_VENDOR)/bin/rmt_storage \
vendor/oneplus/avicii/proprietary/vendor/bin/vl53l1_daemon_main:$(TARGET_COPY_OUT_VENDOR)/bin/vl53l1_daemon_main \
vendor/oneplus/avicii/proprietary/vendor/etc/acdbdata/MTP/MTP_Bluetooth_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/MTP/MTP_Bluetooth_cal.acdb \
vendor/oneplus/avicii/proprietary/vendor/etc/acdbdata/MTP/MTP_General_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/MTP/MTP_General_cal.acdb \
......@@ -47,12 +45,10 @@ PRODUCT_COPY_FILES += \
vendor/oneplus/avicii/proprietary/vendor/etc/firmware/wkeyota.b06:$(TARGET_COPY_OUT_VENDOR)/etc/firmware/wkeyota.b06 \
vendor/oneplus/avicii/proprietary/vendor/etc/firmware/wkeyota.b07:$(TARGET_COPY_OUT_VENDOR)/etc/firmware/wkeyota.b07 \
vendor/oneplus/avicii/proprietary/vendor/etc/firmware/wkeyota.mdt:$(TARGET_COPY_OUT_VENDOR)/etc/firmware/wkeyota.mdt \
vendor/oneplus/avicii/proprietary/vendor/etc/init/android.hardware.keymaster@4.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.keymaster@4.0-service-qti.rc \
vendor/oneplus/avicii/proprietary/vendor/etc/init/ipa_fws.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/ipa_fws.rc \
vendor/oneplus/avicii/proprietary/vendor/etc/init/vendor.oneplus.hardware.CameraMDMHIDL@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.oneplus.hardware.CameraMDMHIDL@1.0-service.rc \
vendor/oneplus/avicii/proprietary/vendor/etc/init/vendor.oneplus.hardware.camera@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.oneplus.hardware.camera@1.0-service.rc \
vendor/oneplus/avicii/proprietary/vendor/etc/libese-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-nxp.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nci.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nci_beijingbus.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci_beijingbus.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nci_changancard.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci_changancard.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nci_productline.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci_productline.conf \
......@@ -61,7 +57,6 @@ PRODUCT_COPY_FILES += \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nci_wuhantong.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci_wuhantong.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nci_yangchengtong.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci_yangchengtong.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nci_zhengzhoubus.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci_zhengzhoubus.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nxp_RF.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp_RF.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nxp_RF_beijingbus.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp_RF_beijingbus.conf \
vendor/oneplus/avicii/proprietary/vendor/etc/libnfc-nxp_RF_changancard.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp_RF_changancard.conf \
......@@ -632,9 +627,6 @@ PRODUCT_COPY_FILES += \
vendor/oneplus/avicii/proprietary/vendor/lib64/libhdrdynamicootf.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libhdrdynamicootf.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libhvx_proxy_stub.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libhvx_proxy_stub.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libipebpsstriping.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libipebpsstriping.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libkeymasterdeviceutils.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libkeymasterdeviceutils.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libkeymasterprovision.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libkeymasterprovision.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libkeymasterutils.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libkeymasterutils.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libmmcamera_faceproc.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libmmcamera_faceproc.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libmmcamera_faceproc2.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libmmcamera_faceproc2.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libmorpho_dcface.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libmorpho_dcface.so \
......@@ -643,7 +635,6 @@ PRODUCT_COPY_FILES += \
vendor/oneplus/avicii/proprietary/vendor/lib64/libofflinelog.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libofflinelog.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libos.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libos.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libqtigef.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libqtigef.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libqtikeymaster4.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libqtikeymaster4.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libsnpe_adsp.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libsnpe_adsp.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libsnpe_dsp_domains_v2.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libsnpe_dsp_domains_v2.so \
vendor/oneplus/avicii/proprietary/vendor/lib64/libsns_device_mode_stub.so:$(TARGET_COPY_OUT_VENDOR)/lib64/libsns_device_mode_stub.so \
......
on init
start keymaster-4-0
service keymaster-4-0 /vendor/bin/hw/android.hardware.keymaster@4.0-service-qti
class early_hal
user system
group system drmrpc
###################### Start of libnfc-common.conf #######################
###############################################################################
# Application options
APPL_TRACE_LEVEL=0xFF
PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
NFC_DEBUG_ENABLED=0x00
###############################################################################
# File used for NFA storage
NFA_STORAGE="/data/nfc"
###############################################################################
# Force UICC to only listen to the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
UICC_LISTEN_TECH_MASK=0x07
###############################################################################
# Configure the default Destination Gate used by HCI (the default is 4, which
# is the ETSI loopback gate.
NFA_HCI_DEFAULT_DEST_GATE=0xF0
###############################################################################
# Forcing HOST to listen for a selected protocol
# 0x00 : Disable Host Listen
# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A
# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B
# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F
# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
HOST_LISTEN_TECH_MASK=0x07
###############################################################################
# Enabling/Disabling Forward functionality
# Disable 0x00
# Enable 0x01
NXP_FWD_FUNCTIONALITY_ENABLE=0x01
###############################################################################
# AID for Empty Select command
# If specified, this AID will be substituted when an Empty SELECT command is
# detected. The first byte is the length of the AID. Maximum length is 16.
AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
###############################################################################
# When screen is turned off, specify the desired power state of the controller.
# 0: power-off-sleep state; DEFAULT
# 1: full-power state
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
SCREEN_OFF_POWER_STATE=1
###############################################################################
# Firmware patch format, Only 1 and 5 should be set
# 0 -> NFC Default
# 1 -> EMVCO Default
# 3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE = Removal process
# 5 -> EMVCO Cert Polling, DISC_IDLE = Removal process , DISC DEACTIVATE = POWER_OFF
# 7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE = POWER_OFF
NFA_CONFIG_FORMAT=1
###############################################################################
# Default poll duration (in ms)
# The defualt is 500ms if not set (see nfc_target.h)
#NFA_DM_DISC_DURATION_POLL=333
###############################################################################
# Force tag polling for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
POLLING_TECH_MASK=0x0F
###############################################################################
# Force P2P to only listen for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
P2P_LISTEN_TECH_MASK=0x05
PRESERVE_STORAGE=0x01
###############################################################################
# Deactivate notification wait time out in seconds used in ETSI Reader mode
# 0 - Infinite wait
NFA_DM_DISC_NTF_TIMEOUT=0
###############################################################################
# AID_MATCHING constants
# AID_MATCHING_EXACT_ONLY 0x00
# AID_MATCHING_EXACT_OR_PREFIX 0x01
# AID_MATCHING_PREFIX_ONLY 0x02
AID_MATCHING_MODE=0x01
###############################################################################
## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547)
## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547)
###############################################################################
# Application options
# Logging Levels
# NXPLOG_DEFAULT_LOGLEVEL 0x01
# ANDROID_LOG_DEBUG 0x03
# ANDROID_LOG_WARN 0x02
# ANDROID_LOG_ERROR 0x01
# ANDROID_LOG_SILENT 0x00
NXPLOG_EXTNS_LOGLEVEL=0x03
NXPLOG_NCIHAL_LOGLEVEL=0x03
NXPLOG_NCIX_LOGLEVEL=0x03
NXPLOG_NCIR_LOGLEVEL=0x03
NXPLOG_FWDNLD_LOGLEVEL=0x03
NXPLOG_TML_LOGLEVEL=0x03
NFC_DEBUG_ENABLED=0x01
###############################################################################
# Nfc Device Node name
NXP_NFC_DEV_NODE="/dev/pn553"
###############################################################################
# Extension for Mifare reader enable
MIFARE_READER_ENABLE=0x01
###############################################################################
# Vzw Feature enable
VZW_FEATURE_ENABLE=0x01
###############################################################################
# File name for Firmware
NXP_FW_NAME="libpn553_fw.so"
###############################################################################
# System clock source selection configuration
#define CLK_SRC_XTAL 1
#define CLK_SRC_PLL 2
NXP_SYS_CLK_SRC_SEL=0x02
###############################################################################
# System clock frequency selection configuration
#define CLK_FREQ_13MHZ 1
#define CLK_FREQ_19_2MHZ 2
#define CLK_FREQ_24MHZ 3
#define CLK_FREQ_26MHZ 4
#define CLK_FREQ_32MHZ 5
#define CLK_FREQ_38_4MHZ 6
#define CLK_FREQ_52MHZ 7
NXP_SYS_CLK_FREQ_SEL=0x02
###############################################################################
# The timeout value to be used for clock request acknowledgment
# min value = 0x01 to max = 0x06
NXP_SYS_CLOCK_TO_CFG=0x06
###############################################################################
# NXP proprietary settings
NXP_ACT_PROP_EXTN={2F, 02, 00}
###############################################################################
# NFC forum profile settings
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
###############################################################################
# Standby enable settings
#NXP_CORE_STANDBY={2F, 00, 01, 01}
###############################################################################
# NXP TVDD configurations settings
# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
# out of them only one can be configured at a time.
NXP_EXT_TVDD_CFG=0x02
###############################################################################
#config1:SLALM, 3.3V for both RM and CM
NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
###############################################################################
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
###############################################################################
# Set configuration optimization decision setting
# Enable = 0x01
# Disable = 0x00
NXP_SET_CONFIG_ALWAYS=0x00
###############################################################################
# Core configuration rf field filter settings to enable set to 01 to disable set
# to 00 last bit
NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
###############################################################################
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
# to 0x00
NXP_I2C_FRAGMENTATION_ENABLED=0x00
###############################################################################
# Mifare Classic Key settings
#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
###############################################################################
# Default SE Options
# No secure element 0x00
# eSE 0x01
# UICC 0x02
# UICC2 0x04
NXP_DEFAULT_SE=0x07
###############################################################################
# Force ESE to only listen to the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
NXP_ESE_LISTEN_TECH_MASK=0x07
###############################################################################
#set autonomous mode
# disable autonomous 0x00
# enable autonomous 0x01
NXP_CORE_SCRN_OFF_AUTONOMOUS_ENABLE=0x00
###############################################################################
#Enable SWP full power mode when phone is power off
NXP_SWP_FULL_PWR_ON=0x00
###############################################################################
#### Select the CHIP ####
#PN547C2 0x01
#PN65T 0x02
#PN548AD 0x03
#PN66T 0x04
#PN551 0x05
#PN67T 0x06
#PN553 0x07
#PN80T 0x08
NXP_NFC_CHIP=0x08
###############################################################################
# CE when Screen state is locked
# This setting is for DEFAULT_AID_ROUTE,
# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
# Disable 0x00
# Enable 0x01
NXP_CE_ROUTE_STRICT_DISABLE=0x01
###############################################################################
#Timeout in secs to get NFCEE Discover notification
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
###############################################################################
NXP_DEFAULT_NFCEE_TIMEOUT=20
###############################################################################
#Timeout in secs
NXP_SWP_RD_TAG_OP_TIMEOUT=0x20
###############################################################################
#Set the default AID route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_AID_ROUTE=0x01
###############################################################################
# Configure the default NfcA/IsoDep techology and protocol route. Can be
# either a secure element (e.g. 0xF4) or the host (0x00)
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_ISODEP_ROUTE=0x01
###############################################################################
# Configure the single default SE to use. The default is to use the first
# SE that is detected by the stack. This value might be used when the phone
# supports multiple SE (e.g. 0xC0 and 0x80) but you want to force it to use
# one of them (e.g. 0xC0).
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_OFFHOST_ROUTE=0x01
###############################################################################
# Configure the single default SE to use. The default is to use the first
# SE that is detected by the stack. This value might be used when the phone
# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
# one of them (e.g. 0xF4).
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_NFCF_ROUTE=0x01
###############################################################################
#Set the default Felica T3T System Code OffHost route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
DEFAULT_SYS_CODE_ROUTE=0x01
###############################################################################
#Set the default AID Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_AID_PWR_STATE=0x1B
###############################################################################
#Set the Mifare Desfire Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_ROUTE_PWR_STATE=0x1B
###############################################################################
#Set the Mifare CLT Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_OFFHOST_PWR_STATE=0x1B
###############################################################################
#Set the Felica CLT Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_FELICA_CLT_PWR_STATE=0x1B
###############################################################################
#Set the SYS_CODE Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Off
# bit pos 4 = Screen Lock
DEFAULT_SYS_CODE_PWR_STATE=0x1B
###############################################################################
# Configure the NFC Extras to open and use a static pipe. If the value is
# not set or set to 0, then the default is use a dynamic pipe based on a
# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
# for each UICC (where F3="UICC0" and F4="UICC1")
OFF_HOST_ESE_PIPE_ID=0x19
OFF_HOST_SIM_PIPE_ID=0x0A
###############################################################################
# Bail out mode
# If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
NFA_POLL_BAIL_OUT_MODE=0x01
###############################################################################
# AID Matching platform options
# AID_MATCHING_L 0x01
# AID_MATCHING_K 0x02
AID_MATCHING_PLATFORM=0x01
###############################################################################
#CHINA_TIANJIN_RF_SETTING
#Enable 0x01
#Disable 0x00
NXP_CHINA_TIANJIN_RF_ENABLED=0x01
###############################################################################
#SWP_SWITCH_TIMEOUT_SETTING
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
# Timeout in milliseconds, for example
# No Timeout 0x00
# 10 millisecond timeout 0x0A
NXP_SWP_SWITCH_TIMEOUT=0x0A
###############################################################################
# interface options for JCOP Download
# Disabled 0x00
# NFC 0x01
# SPI 0x02
NXP_ESE_JCOP_DEFAULT_INTERFACE=0x00
###############################################################################
# Loader service version
# NFC service checks for LS version 2.0 or 2.1
# LS2.0 0x20
# LS2.1 0x21
# LS2.2 0x22
# AT NFC service intialization
NXP_LOADER_SERVICE_VERSION=0x22
###############################################################################
#Timeout value in milliseconds for NFCC standby mode.The range is between 5000
#msec to 20000 msec and zero is to disable.
NXP_NFCC_STANDBY_TIMEOUT=20000
###############################################################################
#Dynamic RSSI feature enable
# Disable 0x00
# Enable 0x01
NXP_AGC_DEBUG_ENABLE=0x00
###############################################################################
#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode
# For Technology routing to ESE Technology Mask = 4
# For ISO-DEP Protocol routing to ESE Mask = 2
# It can also take TECH|PROTO = 6
# To ignore the delay set mask to = 0
NXP_ESE_WIRED_PRT_MASK=0x00
###############################################################################
#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode
#For Technology routing to UICC Technology Mask = 4
#For ISO-DEP Protocol routing to UICC set Mask = 2
#For Select AID Routing to UICC set Mask = 1
#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay
#set mask = 0
NXP_UICC_WIRED_PRT_MASK=0x00
################################################################################
#RF field true delay Wired Mode
# delay wired mode = 1
# allow wired mode = 0
NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00
###############################################################################
#Config to allow adding aids
#NFC on/off is required after this config
#1 = enabling adding aid to NFCC routing table.
#0 = disabling adding aid to NFCC routing table.
NXP_ENABLE_ADD_AID=0x01
###############################################################################
# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal
# JCOP CP TIMEOUT
NXP_CP_TIMEOUT={00, 77}
###############################################################################
# SVDD sync off Delay in ms it can be max 20 ms
# If out of range timeout used, default delay of 10ms will be set
NXP_SVDD_SYNC_OFF_DELAY=10
###############################################################################
#NXP_CN_TRANSIT_CMA_BYPASSMODE_ENABLE
#Enable this config it prevents EMVCo PICC compliancy and Mifare backward compatibility works
#Disable this config EMVCo PICC compliancy works and Mifare backward compatibility will not work
#Default config is Disable
#Enable 0x01
#Disable 0x00
NXP_CN_TRANSIT_CMA_BYPASSMODE_ENABLE=0x00
###############################################################################
#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
#Enable/Disable block number checks for china transit use case
#Enable 0x01
#Disable 0x00
NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
###############################################################################
#Enable NXP NCI runtime parser library
#Enable 0x01
#Disable 0x00
NXP_NCI_PARSER_LIBRARY=0x00
###############################################################################
#This config will enable different level of Rf transaction debugs based on the
#following values provided. Decoded information will be printed in adb logcat
#Debug Mode Levels
#Disable Debug 0x00
#L1 Debug 0x01
#L2 Debug 0x02
#L1 & L2 Debug 0x03
#L1 & L2 & RSSI 0x04
#L1 & L2 & Felica 0x05
#NXP_CORE_PROP_SYSTEM_DEBUG=0x00
###############################################################################
# Wired mode resume timeout vaule in wired mode resume feature enable
# DWP resume time out in ms( 4 bytes hex value and LSB first)
#example 1000 = 0x03E8
#exmaple 2000 = 0x07D0
#example 500 = 0x01F4
NXP_WIREDMODE_RESUME_TIMEOUT={E8,03,00,00}
###############################################################################
# Power to eSE is controlled by DH or PMU depending on following configurations
#define DH_PWR_CONTROL 1
#define PMU_PWR_CONTROL 2
NXP_ESE_POWER_DH_CONTROL=1
###############################################################################
# Timeout value in milliseconds for wired mode resume after RF field event timeout
NXP_NFCC_RF_FIELD_EVENT_TIMEOUT=3000
###############################################################################
# NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured
# External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1
# External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2
# NXP_ESE_POWER_EXT_PMU=2
###############################################################################
# Whether to allow wired mode in desfire and mifare CLT
# Disable 0x00
# Enable 0x01
NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00
###############################################################################
# Enable/Disable Block Route feature.
# Block Route will restrict routing to first matched rule
# Block Route enable 0x01
# Block Route disable 0x00
AID_BLOCK_ROUTE=0x00
###############################################################################
# Send DWP interface reset command as part of SE open
# Disable 0x00
# Enable 0x01
NXP_DWP_INTF_RESET_ENABLE=0x00
###############################################################################
# Timeout value in milliseconds for JCOP OS download to complete
OS_DOWNLOAD_TIMEOUT_VALUE=60000
###############################################################################
# Timeout value in milliseconds to send response for Felica command received
NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000
###############################################################################
# Maximum WTX requests entertained by MW
NXP_WM_MAX_WTX_COUNT=240
###############################################################################
# HAL library path for selftest
NXP_HAL_PATH="/vendor/lib64/hw/nfc_nci.pn54x.so"
###############################################################################
# Enable or Disable RF_STATUS_UPDATE to EseHal module
# Disable 0x00
# Enable 0x01